Skip to main content

AMIE aspirants are at crossroads—whether to continue/discontinue AMIE in the present scenario?

 
A lot of AMIE aspirants are at cross roads—whether to continue/discontinue AMIE in present scenario when fresh AMIE admissions and re-registration are suspended till further orders. The case is being fought in Delhi High Court and nobody knows the outcome. The social media is full of rumours which are void of substance.

Under such a backdrop, a million-pound question is—should an AMIE aspirant, who is eligible to continue his AMIE, should stop or appear in whatever semesters left. Remember, stopping doing AMIE now may lead to loss of money and your hard core efforts. AMIE is still the cheapest option with so many advantages. You might have to spend many times more money joining AMIE in new protocol and with number of subjects almost double and practicals as many as 40!

In our opinion, they must continue with it and try to finish their AMIE at the earliest. There is no harm in doing so as it is the lowest cost option for working aspirants. It would work as a fixed deposit—will benefit you in long run.

IEI president already indicated in an interview few months ago that IEI is trying to convert its continuing education wing in Hyderabad “The Engineering Staff College of India” into a University. It has already got approval by AICTE and CEA. Moreover, inside sources from IEI has already indicated that they are trying their best to bailout students from 2013 to the date when admissions were put on hold. Further, re-registrations were also put on hold. He is very optimistic to win this legal battle.
 
 
To complete AMIE, the only requirement is your strong willpower and effective study material. With the help of these two tools, you will certainly complete AMIE in whatever little time is available to you. You can get effective study material and online support from us.

---

The study material for AMIE/Junior Engineer exams is available at https://amiestudycircle.com
Labels:

Comments

Post a Comment

Popular posts from this blog

Mechanics of Fluids (Solved Numerical Problems)

Numerical The surface Tension of water in contact with air at 20°C is 0.0725 N/m. The pressure inside a droplet of water is to be 0.02 N/cm² greater than the outside pressure. Calculate the diameter of the droplet of water. (7 marks) (AMIE Summer 2023) Solution Surface tension, σ = 0.0725 N/m Pressure intensity, P = 0.02 N/m 2 P = 4σ/d Hence, the Diameter of the dropd = 4 x 0.0725/200 = 1.45 mm Numerical Find the surface tension in a soap bubble of 40 mm diameter when the inside pressure is 2.5 N/m² above atmospheric pressure. (7 marks) (AMIE Summer 2023) Answer: 0.0125 N/m Numerical The pressure outside the droplet of water of diameter 0.04 mm is 10.32 N/cm² (atmospheric pressure). Calculate the pressure within the droplet if surface tension is given as 0.0725 N/m of water. (AMIE Summer 2023, 7 marks) Answer: 0.725 N/cm 2   Numerical An open lank contains water up to a depth of 2 m and above it an oil of specific gravity 0.9 for a depth of 1 m. Find the pressure intensity (i) at t...
Post a Comment
Read more

Energy Systems (Solved Numerical Problems)

Wind at 1 standard atmospheric pressure and \({15^0}C\) has velocity of 15 m/s, calculate (i) the total power density in the wind stream (ii) the maximum obtainable power density (iii) a reasonably obtainable power density (iv) total power (v) torque and axial thrust Given: turbine diameter = 120 m, and turbine operating speed = 40 rpm at maximum efficiency. Propeller type wind turbine is considered. (AMIE Winter 2023) Solution For air, the value of gas constant is R = 0.287 kJ/kg.K 1 atm = 1.01325 x 105 Pa Air density \(\rho  = \frac{P}{{RT}} = \frac{{1.01325x{{10}^5}}}{{287}}(288) = 1.226\,kg/{m^3}\) Total Power \({P_{total}} = \rho A{V_1}^3/2\) Power density \(\begin{array}{l}\frac{{{P_{total}}}}{A} = \frac{1}{2}\rho {V_1}^3\\ = \frac{1}{2}(1.226){(15)^3}\\ = 2068.87{\mkern 1mu} W/{m^2}\end{array}\) Maximum power density \(\begin{array}{l}\frac{{{P_{\max }}}}{A} = \frac{8}{{27}}\rho A{V^3}_1\\ = \frac{8}{{27}}(1.226){(15)^3}\\ = 1226{\mkern 1mu} W/{m^2}\end{array}\) Assuming eff...
Post a Comment
Read more

Design of Electrical Systems (Solved Numerical Problems)

Important note There is something wrong with this question paper. It seems that instead of "Design of Electrical Systems" the IEI has given problems from "Electrical Machines". You should raise a complaint to director_eea@ieindia.org in this regard. Numerical A 120 V DC shunt motor draws a current of 200A. The armature resistance is 0.02 ohms and the shunt field resistance is 30 ohms. Find back emf. If the lap wound armature has 90 slots with 4 conductors per slots, at what speed will the motor run when flux per pole is 0.04 Wb?​ (AMIE Summer 2023, 8 marks) Solution The back EMF (E b ) of a DC motor can be calculated using the formula: E b = V - I a R a   Given: V = 120 V I a = 200 A R a = 0.02 ohms Substituting the values into the formula: E b = 120 − 200 × 0.02 = 120 − 4​ = 116 V Now, let's calculate the speed (N) at which the motor will run using the given flux per pole (φ p ). The formula to calculate the speed of a DC motor is: N = 60×E b /(P×φ p ) Wh...
Post a Comment
Read more